Gas Walk Behind Mower — service parts and specifications. Also written 944365450.
Read this before you order anything. These figures are transcribed automatically from manufacturer manuals and can be wrong. Nothing here is a fitment guarantee or professional advice.
Provided free, as is, with no warranty and no liability accepted — you use it at your own risk and on your own responsibility. Check every number against the plate on your own machine before you buy or fit a part.
Reference data — no warranty, no fitment guarantee, used at your own risk. Disclaimer
Transcribed from the manufacturer manual — not a fitment guarantee. Manufacturers supersede part numbers during a production run: check these against the plate on your own machine before ordering.
Spark plug — Replace annually or every 100 operating hours. Cross-reference equivalents from other brands usually fit.
Engine oil — Grade depends on operating temperature, not on the machine. Several grades listed below are all correct — pick by season.
Belt — Belts are consumables. Length and width must match exactly — a belt that is half an inch off will throw or burn.
Blade — Sharpen or replace at the start of each season. Always balance a sharpened blade before refitting.
| Item | Value | Context | Page |
|---|---|---|---|
| Spark plug | BPR6ES | … Flange #6 x 12 (CT200) Bolt, Flange #6 x 14 (CT200) Oil Seal 25A x62 x 6 Plug, Spark (BPR6ES) (NGK) Guide, Exhaust Valve (O. S.) FLYWHEEL KEY PART … | 27 |
| Engine oil | 5W30 | GRADES ITEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE NOTE: Multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, and you … | 13 |
| Engine oil | 10W30 | S ITEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE NOTE: Multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, and you … | 13 |
| Belt | 182212 | … Decal, Drive Control Adjustment (bottom) 43 188331 Pinion Assembly, LH Screw 44 182212 V-Belt Gear Case Assembly, Complete 45 175098 Pawl Pulley … | 23 |
| Blade | 189026 | … Po KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION 1 196748 Handle, Upper 31 189026 Blade, 21" 2 193664 Handle, Lower 32 851074 Washer 3 … | 21 |